10
TOOLS AND HARDWARE REQUIRED
X
SECTION 2 (CONTINUED)
2.1
• Make sure the Rubber Gasket
is inside the Base Cap.
AJM
AJN
AJN
Rubber Gasket
• Screw the
Base Cap (AJN)
onto the
Base (AJM)
as shown.
!
AJN
2.2
• Position the Pole assembly on the
Base (AJM)
as shown. Slide the
21 3/4” Axle (AJD)
through one of the
Wheels (AMU)
and into the
Base (AJM)
. Have one adult position the
Bottom Pole (ALE)
within the Base as shown
with the
lip at the
bottom of the pole facing away from the base.
Insert the Axle through the Bottom Pole and into the other side of the
Base and through the other Wheel.
• It may be necessary to use a
Rubber Mallet to tap the Axle
into place.
!
AJM
ALE
AMU
AMU
AJD
ALE
