13
TOOLS AND HARDWARE REQUIRED
X
SECTION 2 (CONTINUED)
2.5
CMV
(x1)
• After the Poles have been seated, measure up one inch from the bottom center of the
Top Pole (ALH)
and insert
one
Self-Drilling Screw (CMV)
into the back of the Pole as shown. Then insert the
Pole Cap (ALM)
into the Top Pole.
Save the remaining Screw for use in Section 5.
ALH
ALF
CMV
1” up from
bottom of
Top Pole
CMV
• Chuck the Self-Tapping Screw directly into an Electric Drill for easy installation, or
use a 3/8” Hex Driver.
!
ALH
ALM
