PAGE 1 OF 9
1120 IH-9013
H-9013
PEGBOARD CART
WITH SHELVES
1-800-295-5510
uline.com
TOOLS NEEDED
8 mm Combination Wrench
8 mm Socket Wrench
10 mm Combination Wrench
10 mm Socket Wrench
12 mm Combination Wrench
14 mm Combination Wrench
12 mm Socket Wrench
14 mm Socket Wrench
or
ATTACH SUPPORT PANELS
1. Position deck on flat surface with lipped edge facing up.
Place one support panel against the inside corner of the short
side of the deck. Align holes on the bottom of the support
panel with holes in the deck lip. (See Figure 1)
2. Insert three short bolts through the holes in the deck lip.
Thread on M6 flange nuts and secure using 10 mm wrench,
but do not tighten. (See Figure 1)
3. Repeat steps 1 and 2 for second support panel.
(See Figure 1)
PARTS
ASSEMBLY
#2 Phillips Screwdriver
Swivel Caster
with Brake x 2
Long Bolt x 16
Washer x 16
M5 Flange Nut x 8
M6 Flange Nut x 34
M8 Flange Nut x 16
Short Bolt x 34
Phillips Head Bolt x 8
Rigid Caster x 2
Pegboard Panel x 2
Top Bar x 1
8" Deep Shelf x 1
10" Deep Shelf x 1
12" Deep Shelf x 1
Handle x 2
Support Frame x 2
Deck x 1
SAFETY
• Do not sit, climb, hang or step on hooks or holders.
• Do not overload hooks or holders.
• Do not try to assemble pegboard cart by yourself.
Use two people.
Figure 1
Two Person Assembly
Required
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7- 9.
