18
X
SECTION 4 (CONTINUED)
TOOLS AND HARDWARE REQUIRED
4.1
• Attach the
Short Extension Arms (AKC)
to the Backboard Brackets in the location shown with the hardware indicated.
Secure only by hand at this point.
AKC
AKC
AAX
ABN
ABN
DGA
AAX
(x1)
ABN
(x2)
DGA
(x1)
3/4" (19 mm)
(x2)
• DO NOT strike this Bolt (GBU) with a mallet!
If there is diffi culty sliding the Bolt into place,
use a wrench to turn the Bolt until it has
advanced into position.
!
• A Centerlock Nut requires
some effort to thread onto a
Bolt. See page 4 for details.
• If necessary, use a bolt to remove any
excess powder coating from the holes in the
Backboard Brackets.
!
GBU
(x1)
GBU
7 5/8” (19.4 cm)
