33
TOOLS AND HARDWARE REQUIRED
X
SECTION 6 (CONTINUED)
ABZ
(x1)
• After the Poles have been seated, insert a
#14 x 1”Self-Tapping Screw (ABZ)
directly into the back of the Middle Pole
just above where it meets the Bottom Pole.
ABZ
ALM
ALH
• Insert the
Pole Cap (ALM)
into the
Top Pole (ALH)
as shown.
6.6
6.7
• Chuck the #14 x 1” Self-Tapping Screw directly into
an Electric Drill for easy installation, or use a 3/8”
Hex Driver.
!
