7
Loosen this nut
on both sides and
adjust the angle
until the rim is
level. Re-tighten
the nuts
8
Rest a Carpenters Level on the rim, perpendicular to the
backboard. Loosen the
nuts shown and adjust the
backboard until the rim is level.
AZ
Raise the Backboard until the Rim is at
10 feet, 1 inch above the playing surface
Remove about an inch of backing
from the top of the Height Sticker (AL).
Squeeze the Gas Spring Cover (AZ)
to allow room for the Sticker and apply
the Height Sticker to the Back of the
Gas Spring (AN), lining up the 10’ 1”
line with the height indicators as shown.
Press the Sticker into place while slowly
removing the rest of the backing to
prevent wrinkles in the Sticker.
Squeeze
here
AL
AN
9
Attach the Net (AB).
Please call our Customer Service Department at the number on Page
Two to obtain replacement Nets. Our Nets are shorter than average to
reduce the risk of entanglement.
50
AB
AO
