Lifetime FOOT ADJUST, Assembly Instructions Manual

Page: 14 / 44

14
X
SECTION 3 (CONTINUED)
TOOLS AND HARDWARE REQUIRED
3.4
3.5
AAV (x2)
ABK (x2)
• Do NOT overtighten the hardware so that the
7/16” Rubber Washers bulge outward as shown.
!
ABI
AAJ
ABD
ABF
ALX
AAV
AAV
ABK
ABI
ABK
• Insert two 5/16” x 2 1/4” Tap Bolts (ABI) with the 5/16” Washers (ABD) and the 7/16” Rubber Washers (ABF) through the bottom holes
in the back of the Rim (ALX) as shown, and secure the hardware with two 5/16” Hex T-Nuts (AAJ) .
• Secure Rim Assembly to the Backboard with the hardware as shown.
AAJ (x2)
ABD (x2) ABF (x2)
ABI (x2)
1/2” (x2)
(x1)
ABF
ABF
Correct
Incorrect
ABI
ABI
AAJ
AAJ
ALX
• Make sure that the Tap Bolts
are positioned on the outside
edge of the holes as shown.
!