background image

22

The life of your basketball system depends on many variables. This system is intended for indoor use only. The climate, exposure to 
corrosives such as salt, pesticides, or herbicides, and excessive use or misuse can all contribute to failure of the electronics, metal 
tubes and plastic components, which may cause property damage or personal injury.

Check your basketball system frequently for loose hardware, excessive wear, and signs of corrosion. For safety reasons, and to 
prolong the life of your basketball system, you must take the following preventive measures:

a.  Check all Nuts and Bolts. If any are loose, tighten them.
b.  Check all parts for excessive wear and tear. If necessary, replace any parts that have been worn or damaged through usage. 

Contact our Customer Service Department for replacement parts.

c.  Inspect the Warning Stickers on the system. If they are ripped, faded, or illegible, call our Customer Service Department to 

request a replacement Sticker.

d.  Check all Pole sections for visible rust or chipped or cracked paint. If either are present, do the following:
 

1. Use an emery cloth to completely remove any rust or chipped paint.

 

2. Clean the area with a damp cloth and allow it to dry.

 

3. Apply two coats of a rust preventative, high gloss enamel paint to the area. Allow the paint to dry between coats.

IF RUST HAS PENETRATED THROUGH THE POLES ANYWHERE, REPLACE IT IMMEDIATELY!

MAINTENANCE

LIFETIME’S PROMISE TO YOU:

We invite you to read our privacy policy at www.lifetime.com

REGISTER today!

At Lifetime

®

, we are committed to providing innovative and quality products. While registering, you will have the opportunity to give us your feedback. Your input is 

valuable to us.

• You can also opt in to receive new product notifi cations or promotions.
• In the unlikely event of a product recall or safety modifi cation, your registration provides the information we need to notify you directly. 
• Registration is fast, easy, and completely voluntary.

Maintaining your privacy is our long-standing policy at Lifetime

®

. And you can rest assured that Lifetime

®

 will not sell or provide your 

personal data to other third parties, or allow them to use your personal data for their own purposes.

REGISTER YOUR PRODUCT ONLINE AT WWW.LIFETIME.COM 

Summary of Contents for DOUBLE SHOT 90648

































Reviews: