RC
Underside of Table
RD
RC
RC
RD
RD
Secure
Support Braces
AL
to
AK
using three ()
5mm Washers
and three ()
5mm Cap Nuts
.
WARNING
Do not overtighten the Cap Nut. If the end of
the Bolt breaks through the plastic cap, call our
Customer Service Department at the number
on Page One. Exposed threads on the end of
the Bolt may cause serious injuries.
CAUTION
Do not overtighten Screws (RA).
Overtightening may damage
parts and void warranty.
3f
3g
AL
RA
Pilot Hole
Pilot Hole
RA
Underside of Table
Hardware Bag:
1020883
Screwdriver
Adjsutable Wrench
Step 3 Hardware
RC
()
RD
()
RA
(1)
Completely tighten all Screws (RA).
Remove the first
1/4” x 1/2” Screw (RA)
and gently tilt the
Support
Brace (AK)
and slide the last
Support Brace (AL)
into place.
Replace the first
1/4” x 1/2” Screw (RA)
into the first
Support Brace (AK)
.
Finally, secure the last
Support Brace (AL)
to the
Table Top
.
Completely tighten all Cap Nuts (RE).