1
Footcaps on Table Legs
Turn a
Table Leg (AC)
upside down. Place a
Footcap (AH)
on
the bottom of each leg. Secure the each
Footcap
with two ()
#8
x 1/2” Screws (RE)
. Repeat for remaining two legs.
1a
2
Assemble Legs
Turn Table Legs right side up. Attach one (1)
Center Leg Brace
(AD)
to each table leg as shown. Ensure the end of brace angles
upwards. Secure with two ()
#8 x 1/2” Screws (RE)
. Repeat for
remaining Legs.
Completely tighten both Screws, then loosen them one (1) full
2a
Stand
Table Legs assemblies
in circle with braces pointing in
towards the center.
2b
Hardware Bag:
1020883
Screwdriver
RE
(1)
Hardware Bag:
1020883
Screwdriver
RE
(9)
Step 1 Hardware
Step 2 Hardware
RE
RE
AD
RE
AH
AC
AH
RE
Note:
Completely tighten both
Screws (RE)
, then loosen them one
(1) full turn.