background image

WARNINGS

Do not attempt to adjust or operate wheelchair without
reading carefully all instruction

 

in this manual.

This wheelchair has not been approved as a seat that can be
used within vehicles of any kind. Always transfer wheelchair
user to a vehicle manufacturers approved seat and use
safety restraints available. 

Do not operate this wheelch

a

ir on roadways, streets or

any surfaces with vehicular traffic. 

Do not attempt to operate on inclines 10% or greater
without proper assistance. 

Be sure to completely engage wheel locks when getting in
and out of wheelchair or when in elevator or wheelchair lift. 

When getting in or out of wheelchair, do not stand on or
apply weight to foot rests. 

Do not lean over or apply weight to the top of wheelchair
back. This can cause wheelchair to tip over. When trying to
extend arms over back, only reach as far as your arm can
extend without having to alter your seating position. 

Do not stand on wheelchair.

Weight cap is 300 lbs.

Wheelchair should be on a smooth, stable and level area
with wheel locks engaged before transferring user in or
out of wheelchair. 

Do not use wheel locks to slow your descent down
an incline.

Summary of Contents for L4016BLSF







Reviews: