background image

 

 

2.   IMPORTANT ELECTRICAL INFORMATION

 

WARNING! 

 

  Route the power cord away from any moving part of the treadmill including the elevation mechanism 

and transport wheels.  

  NEVER remove any cover without first disconnecting AC power.  

  NEVER expose this treadmill to rain or moisture. This treadmill is not designed for use outdoors, 

near a pool, or in any other high humidity environment.  

  This is a high-power item; please do not share the same outlet with other high-power machines 

such as, fridges, air conditioning etc. Please choose an outlet exclusively for the machine and make 

sure the fuse is 10A. 

3.   IMPORTANT OPERATING INSTRUCTIONS

 

  Understand that changes in speed and incline do not occur immediately. Set your desired speed on 

the computer console and release the adjustment key. The computer will obey the command 

gradually. 

  Use caution while participating in other activities while walking on your treadmill, such as watching 

television, reading, etc. These distractions may cause you to lose balance or stray from walking in 

the centre of the belt; which may result in serious injury.  

  Never start the treadmill while you are standing on the walking belt. After turning the power on and 

adjusting the speed control, there may be a pause before the walking belt begins to move, always 

stand on the foot rails on the sides of the frame until the belt is moving. 

  Never mount or dismount on a high-speed setting to avoid injury. 

  Always hold on to handrail while making control changes.  

  A safety key is provided with this machine. Remove the safety key will stop the walking belt 

immediately; the treadmill will shut off automatically. Inserting the safety key will reset the display.  

 

Do not use excessive pressure on console control keys. They are precision set to function properly 

with little finger pressure.

 

Summary of Contents for Walkstation L1
























Reviews: