background image

 

 

1.   IMPORTANT SAFETY INSTRUCTIONS 

 

WARNING 

Read all instructions before using this treadmill.

 

It is important your treadmill receives regular maintenance to prolong its useful life. Failing to 

regularly maintain your treadmill may void your warranty. 

 

 

Danger 

– 

To reduce the risk of electric shock disconnect your treadmill from the electrical outlet prior to 

cleaning and/or service work.  

DO NOT USE AN EXTENSION CORD: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY 

USING IMPROPER ADAPTERS OR IN ANY WAY MODIFY THE CORD SET.  

  Install the treadmill on a flat level surface with access to a 220-240 volt (50/60Hz), grounded outlet. 

  Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet and 

treadmill may result.  

  Do not block the rear of the treadmill. Provide a minimum of 1 metre clearance between the rear of 

the treadmill and any fixed object.  

  Place your unit on a solid, level surface when in use 

  When running, make sure the plastic clip is fastened on your clothing. It is for your safety, should 

you fall or move too far back on the treadmill.  

  Keep hands away from all moving parts.  

  Never operate the treadmill if it has a damaged power cord or plug. When damaged, these must be 

replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a 

hazard. 

  Keep the cord away from heated surfaces.  

  Do not operate where aerosol spray products are being used or where oxygen is being 

administered. Sparks from the motor may ignite a highly gaseous environment.  

  Never drop or insert any object into any openings.  

  The treadmill is intended for in-home use only and is not suitable for commercial environments.  

  To disconnect, turn all controls to the off position, remove the safety key, and then remove the plug 

from the outlet.  

Summary of Contents for Walkstation L1
























Reviews: