8
SP-880
4. ASSEMBLY INSTRUCTIONS
STEP 1: PREPARATION
A. Before assembling make sure that you will have enough space around the item.
B. Use the present tooling for assembling.
C. Before assembling please check whether all needed parts are available (at the above of this
instruction sheet you will find an explosion drawing with all single parts (marked with numbers) which
this item consists of.
STEP 2:
1. Attach the Front Stabilizer (pt.15) to the
Main Frame (pt.16) using two sets of Ø8
Flat Washers (pt.5), M10 Domed Nut
(pt.6) and M10*55 Carriage bolt (3).
2. Attach the Rear Stabilizer (pt.4) to the
Main Frame (pt.16) using two sets of Ø10
Flat Washers (pt.5), M10 Domed Nut
(pt.6) and M10*55 Carriage bolt (3).
3. Secure the bottle holder (pt.74) to the
main frame (pt.16) with the screw (pt.43).
4. Slide the bottle (pt.75) into the bottle
holder (pt.74)