A. Remove the 5 Allen
screws (15) from the seat
slide frame.
Step 6: Install Storage Tray
B. Install the storage tray (11)
onto the seat slide frame.
C. Line up the mounting
holes and re-install the
5 Allen screws removed
in step A.
15
A. Remove the 4 bolts (19) from the bottom of the seat (Y) notating the holes that they
are removed from.
Note:
There are two sets of holes in the seat mount (Z). The front set of holes is recommended.
Step 7: Install Seat Bottom
B. Line the seat bottom up with
the preferred set of holes in
the seat mount and install the
four bolts previously removed
in step A. Do not tighten until
all four bolts are installed.
11
15
Y
Z
R7000i
Interactive Recumbent Cycle
19
