LIFESPAN PERFORMER PLUS
22
1.
Disconnect the main power supply.
2.
Fold the treadmill up into the storage position.
3.
Feel the back surface of the running mat.
If the surface is slick when touched, then no further lubrication is needed.
If the surface is dry to the touch, apply a suitable silicone lubricant.
We recommend you use a silicone based spray to lubricate your Lifespan Treadmill.
This Can be purchased from your local sports Retailer or a local hardware store.
5.6 Belt Adjustment
Belt Tension Adjustment-It is very important for joggers and runners in order to provide a
smooth, steady running surface. Adjustment must be made from the right and left rear roller in
order to adjust tension with the Hexagonal Wrench provided in the parts package. The
adjustment bolt is located at the end of the rails as noted in diagram below:
Note: Adjustment is thru the small hold on the end caps.
Tighten the rear roller only enough to prevent slippage at the front roller. Turn both the right
and left bolt clockwise reasonably and inspect for proper tension. When an adjustment is made
to the belt tension, you must also make a tracking adjustment to compensate for the change in
belt tension.
DO NOT OVERTIGHTEN -
Over tightening will cause belt damage and premature bearing failure.
5.7 Belt Tracking Adjustment
This treadmill is designed to keep the belt reasonably centred while in use. It is normal for
some belts to drift near one side while the belt is running with no one on it. After a few
Left bolt
Right bolt
