19
METER MEMORY
This meter stores the
1000
most recent blood glucose test results
along with respective HCT values, dates and times or β-ketone/total
cholesterol test results along with respective dates and times in its
memory. To enter the meter memory,
start with the meter switched
off.
Reviewing Test Results
1. Press and release M.
“ ” will appear on the display. Press
M
again, and the first reading
you see is the last blood glucose result along with HCT value, or the
β-ketone/total cholesterol result
,
date, time and the measuring mode.
2. Press M
to recall the test results stored in the meter.
After the last
test result, press M again and the meter will switch off.
Reviewing Blood Glucose Day Average Results
1. Press and release M.
When “ ” appears on the display, keep
pressing M for 3 seconds until the flashing “
” appears. Release
M
and then your 7-day average result measured in general mode will
appear on the display.
2. Press M to review
14-, 21-, 28-, 60- and 90- day average results
stored in each measuring mode in the order of General, AC, and then
PC.
3. Exit the meter memory.
Keep pressing the
M
and the meter will
switch off after displaying the last test result.
NOTE:
• Any time you wish to exit the memory, keep pressing
M
for 5 seconds or
leave it without any action for 3 minutes. The meter will switch off
automatically.
• Control solution results are
NOT
included in the day average.
Summary of Contents for 2 Plus LS-946C
Page 1: ...Owner s Manual Multi Functional Monitoring System LS 946C ...
Page 2: ......
Page 8: ...8 g a SET f l c d e b j k h i ...
Page 31: ......
