Lifescan OneTouch Profile, Owner'S Booklet

Page: 19 / 106

Checking Meter’s Display
A display test is built into your meter.
When you first begin to perform a
blood or control solution test, the
entire display will briefly turn on
when you turn on your meter. Press
and hold the “on/off” button down to
extend the viewing period. You should
carefully observe the display to make
sure all “segments” or parts of the dis-
play turn on each time you test your
blood.
Display Test
Properly Functioning Display
Display with Missing Segments
Note: You do not have to enter
the set-up mode to test. However,
the OneTouch
®
Profile
®
Meter has
a number of settings you can
change, including the language,
time and date, display formats,
and the unit of measure. For a
description of these options and
how to set them, see page 27.
12
BEFORE TESTING
BEFORE TESTING
All segments are active, the display is working properly.
Some parts of the display are not working.
Message will be incomplete.