background image

30-Day Money-Back
Guarantee

If you are not fully satisfied
with the ONE TOUCH

®

II

System, a full refund may
be obtained by calling a
LifeScan Technical
Representative at the toll-
free number within 30 days
after purchase. You must
return the ONE TOUCH

®

II

Meter and a copy of your
receipt to receive a refund.

Five-Year Warranty

The following warranty
policy applies only to the
original purchaser of this
Meter and does not include
the battery supplied with
the Meter.

1. Please complete the
warranty card and mail it 
to LifeScan.

2. The ONE TOUCH II
Meter has a full five-year
warranty from the original
date of purchase. Write your
date of purchase here:

_________________________

If, at any time during the
first five years after you buy
the Meter, it does not work
for any reason (except for
obvious abuse), LifeScan
will replace it with a new
Meter or equivalent product
free of any charge.

3. If the ONE TOUCH II
Meter does not work and is
returned by the original
owner for service after the
five-year period, a replace-
ment Meter will be sent to
the original owner.

85

14. GUARANTEE AND WARRANTY

LSI-97-051 OT2.bklt.C.Eg  10/8/97 3:10 PM  Page 85 (1,1)

Summary of Contents for One Touch ll
























































































Reviews: