Lifescan In Duo Manual Download Page 15

Page: 15 / 90

GETTING YOUR InDuo™ SYSTEM READY FOR USE

Caution:

• Use only OneTouch

Ultra

Control Solution.

• Check the expiration date on the control solution

vial. Do not use if expired.

• Store control solution tightly closed at temperatures

below 30°C (86ºF).

• Do not refrigerate control solution.
• The control solution, the InDuo™ meter, and the

OneTouch

Ultra

Test Strips should be at room

temperature 20-25ºC (68-77ºF) before testing.

• Shake the vial, discard the first drop of control

solution and wipe off the dispenser tip with
a clean tissue to obtain a good sample and an
accurate result.

• Use only for 3 months after the first opening.

Record the discard date (date opened plus 3 months)
on the control solution vial. Discard after 3 months.

•

The control solution range printed on the
OneTouch

Ultra

Test Strip vial is for

OneTouch

Ultra

Control Solution only. It is used

to test meter and OneTouch

Ultra

Test Strip

performance. It is not a recommended range for
your blood glucose level.

DCO_06153701A_ID_OB_CAN 9/6/02 11:36 AM Page 15

Summary of Contents for In Duo



























































































Search results

Summary of Contents for In Duo

Reviews:

Related manuals for In Duo

Brands by name

Popular brands

Lifescan In Duo, Manual

Search results

Summary of Contents for In Duo

Reviews:

Related manuals for In Duo

Brands by name

Popular brands