8
BioHeal User Manual Lifepro
USING THE BIOHEAL
• Place the protective eyeglasses over your eyes before powering on the device.
When using, never look directly into the LED lights without the protective
eyeglasses, particularly when the near-infrared (NIR) lights are on.
• Remove clothing and any accessories from the area you wish to treat.
• Position the BioHeal panel 6–12 inches away from the area to be treated.
• We recommend that first-time users begin with 3–5 minute treatment
sessions per area and work up to 10-minute treatment sessions.
• We recommend that continuing users use the BioHeal for 10–12 minute
treatment sessions per area.
• Monitor treated areas for several days after the initial treatment. If you feel
discomfort or sensitivity, increase your distance from the BioHeal during
treatment or decrease treatment time (either the time per session or the
number of sessions per day/week).
• Do not use continuously for more than 30 minutes, and wait at least 6 hours
between treatment sessions on the same area.
• Use the device to treat the same area a maximum of 2–3 times per day.
• Use the device 3–7 days a week, depending on your tolerance to treatment.
• It is best to increase treatment time (the number of minutes per session
and the number of sessions per day and per week) slowly over a period of
several days or weeks. How slowly you increase treatment will depend on
your individual skin sensitivity and tolerance to treatment.
• It is normal to feel a gentle warmth during and after your treatment session.
• For best results, do not use after applying lotions or creams to your skin.
IMPORTANT SAFETY INFORMATION
• Keep the BioHeal and power cables away from heat sources and fire.
Excessive heat can potentially cause fire, electrocution, or injury to people
or property.
• The device is not waterproof. Keep away from liquids. Do not immerse in
water.
• Never use the device or plug/unplug the power cable with wet hands.
• Always power off and unplug the device after each use.
Wellness Recovery Collection
9
CONNECT TO POWER
• Plug the power cable
(G)
into the power cord jack on the back of
the BioHeal Red Light Therapy Panel
(A)
.
• Plug the power cable into a standard wall outlet.
PREPARING TO USE
• Remove clothing and accessories from area you wish to treat.
• Place a pair of protective eyeglasses
(D)
over your eyes.
• Position the device 6–12 inches from the area you wish to treat.
BEGIN YOUR TREATMENT
• Flip the red power switch on the back of the BioHeal panel to the
ON position.
• Press the On/Pulse/Off button on the control panel to begin your
red light therapy treatment. The default treatment is red light
+ near-infrared light (Mode 1). The default working time is 10
minutes.
• Adjust the mode and working time, as desired.
• Turn on the pulsed-light feature, if desired.
2
3
1
FLASHING LIGHT WARNING:
The pulsed-light feature may affect users who are
susceptible to photosensitive epilepsy or other photo-sensitivities. If you or anyone
in your household has ever had symptoms related to epilepsy (seizures or loss of
consciousness) when exposed to flashing lights, consult your physician before using the
BioHeal.
If you, or anyone in your household, experience symptoms while using the BioHeal,
such as dizziness, blurred vision, eye or muscle twitching, loss of consciousness,
disorientation, involuntary movements or convulsions, stop using the device
IMMEDIATELY and consult your physician.
WARNING:
Always wear a pair of protective eyeglasses when using the BioHeal. Never
look directly into the LED lights without the protective eyeglasses as this can damage
your eyes. While near-infrared (NIR) light is not visible to the naked eye, it can be
particularly harmful for your eyes.
