model no.
IFH12A-50
10
The
CAUTIONindicator
is on. In this case, immediately turn the heater OFF
and inspect for any objects on or adjacent to the heater that may cause high
temperatures.
DO NOT OPERATE THE HEATER WITH THE CAUTION
INDICATOIR GLOWING RED.
ADJUSTING AIR FLOW DIRECTION
1. To turn the unit when it has been installed with a single lag bolt, simply
turn the entire heater as needed. The unit cannot be turned horizontally if it
has been installed with 2 lag bolts.
2. To tilt the unit vertically, loosen the bracket screws.
NOTE:
For the heater to be tilted vertically, it must be mounted in bottom
keyhole slots of mounting brackets to maintain adequate clearance and
prevent possible overheating.
1. Adjust louvers to the desired position.
NOTE:
The louvers are designed so they cannot be completely closed. Do not
attempt to defeat this feature; damage to the unit can result.
WARNING:
To prevent possible electric shock, disconnect power to the
heater at the main service box before attempting to adjust the heat output of
this unit.
MAINTENANCE INSTRUCTIONS
MAINTENANCE AND CLEANING
1. Before cleaning, make sure the power has been turned off at the circuit
breaker panel and that the heating element of the heater is cool.
2. To maintain the external appearance of the radiator, it need only be wiped
over occasionally with a dry duster. During the summer months, or at other
times when the appliance is not in use and is completely cold, It should be
the best opportunity to wipe over with a damp cloth.
