7
Introduction
Thank you for choosing our LifeGoods product! Please always follow the instructions for safe usage. If you
have any questions about the product or experience any problems, please contact us by email: service@
lifegoods.nl
The LifeGoods nail drill can be used for grinding, carving, cutting, polishing, removing gel polish and cuti-
cles for both acrylic nails and natural nails. The adjustable speed and direction switches are easily operable.
The professional high-tech motor makes the electric file low heat, low noise, and low vibration. Drill bits and
sanding bands are included.
-
-
Warnings and Safety Instructions
Please ensure that the packaging is kept out of the reach of children! Risk of suffocation!
Make sure to keep this user manual. Read the manual carefully before using your LifeGoods Manicure
and Pedicure Set!
Be aware of the risks and consequences resulting from misuse of the nail drill. Misuse of the nail drill can
result in personal injury, or destruction of the instrument/appliance/device and of the installations.
This device should NOT be used by children or persons with physical, sensory or mental disabilities, or
persons (including children) with lack of experience with and knowledge of the device, unless they are
supervised or have been given instruction concerning the use by a person responsible for their safety.
Use the nail drill only for purposes described in this user manual.
The nail drill is designed and intended for private, non-commercial use only.
Do NOT reconstruct, repair or disassemble the nail drill. This can damage the device. For safety reasons,
these parts may only be replaced by authorized service personnel. In order to prevent hazards, always send
the nail drill to the service centre for repairs.
Make sure your outlet supplies the correct power voltage to avoid damage to the Electric Nail
Do NOT leave the nail drill unattended when in use. When you are not using the nail drill, turn the device off
and disconnect the device from the power socket
Do NOT disconnect the nail drill from its power supply by pulling the cable.
Do NOT carry or pull the device by its cable.
Make sure that you do NOT trip over the cable. The cable should not be kinked, trapped or twisted.
Only connect the mains adapter when the nail drill is switched off.
Use a standard nail drill bit. Do NOT use a crooked or damaged nail drill bit to prevent damages and perso-
nal injury.
Do NOT use the nail drill if you notice unusual movements or noises.
Do NOT use the nail drill if the power cable has been damaged, the mains adapter is defective, if the unit
does not work perfectly, if it has fallen into water or has been damaged.
Do NOT touch any rotating parts when you are using the nail drill.
Use and store the nail drill in a dry environment and keep it away from oil and grease.
Do NOT use any electrical equipment while taking a bath or shower. Make sure that the nail drill does not
come into contact with water.
Do NOT store or keep any electrical equipment in places where it could fall into the bathtub or washbasin.
Do NOT use and store the nail drill on hot surfaces,in or near cooling equipment or heat sources such as
electric heaters, radiators, or stoves.
Do NOT use and store the device in spaces with strong vibrations, dust, smoke, chemical and corrosive
substances, or toxic gasses.
Do NOT use the device when the connecting wires are broken and do NOT touch the plug with wet hands
to prevent electric leakage and shocks or fire.
Do NOT use the nail drill in rooms in which aerosols (sprays) are being used or where pure oxygen is being
administered.
Do NOT allow the unit to become overheated due to excessively long use. Uninterrupted treatment should
not last longer than 15 minutes. Then switch off the unit for at least half an hour and allow it to cool down.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
!
!
