LifeGear SYMPHONY PRO 97655 Owner'S Manual Download Page 24 | Manualshive

Page: 24 / 29

LifeGear SYMPHONY PRO 97655 Owner'S Manual Download Page 24

23

ERROR MESSAGES

Error Messages

Potential Cause

Things to Check

E1

The computer console did not
receive any feedback within
30 seconds from the power
control board.

Please re-check and/or re-connect
the cable joint between the
computer console and the power
control board.

E2

The power control board did
not receive any input voltage
from the motor.

Please re-check and/or re-connect
the cable joint between the
motor and the power control board.

E3

No speed sensoring
information, problem on
speed sensor.

Please check the

speed sensor

.

Please re-check and/or re-connect
the sensor cable.

E4

Defection on cables
between the incline motor
and

the power control board

.

Please re-check and/or re-connect
the cable joint between

the

incline motor

and the power

control board.

E5

Overload of the input current
of motor that triggered the
power control board
protection.

Please check the resistance of the
running belt.

E6

Overload of the input voltage
of motor that triggered the
power control board
protection.

Defection on motor.

Please check the input power.
Please re-check and/or re-connect
the cables for motor.

---

Security protection.

Please check the Safety Tether
Key is placed on right position and
fitted properly.

«
...
22
23
24
25
26
...
»

Summary of Contents for SYMPHONY PRO 97655






























Reviews:

No comments