10
Step 2
Connect the Sensor Wire II (72) from the Right Handlebar Support Tube (4) to the wire
that comes from the Computer (53). It is recommended to have a second person assist
with this step. One person should hold the Computer (53) in place while the other person
connects the sensor wires.
Insert the Computer (53) onto the Left and Right Handlebar Support Tubes (3, 4) using
eight M8x55 Hexagon Socket Head Cap Bolts (61) and eight Ø8Flat Washers (18).
Tighten bolts with the 5mm Allen Wrench with Phillips Screwdriver provided.
Place the
Safety Tether Key (79) onto the Computer (53).
IMPORTANT:
While sliding the computer onto the right and left handlebar support tubes,
make sure the wires are installed inside the right and left handlebar support tubes and pay
attention not to pinch the wires.
NOW
PLEASE FULLY TIGHTEN ALL BOLTS INSTALLED IN STEP 1 WITH THE
TOOLS PROVIDED.
Hardware:
(61) Hexagon Socket
Head Cap Bolt M8x55
8 PCS
(18) Flat Washer Ø8
8 PCS
79
53
6
61
18
18
72
61
61 18
61
18
3
4
73
5mm Allen Wrench with
Philips Screwdriver
Tool:
