8
Step 2
Connect the Sensor Wire II (23) from the Right Handlebar Support (25R) to the Sensor
Wire III (24) from the Handlebar Bracket (26).
Tuck wires into the Right Handlebar Support (25R).
Install the Handlebar Bracket (26) to the Right and Left Handlebar Supports (25R, 25L) by
inserting the Handlebar Bracket (26) into the Right and Left Handlebar Supports
(25R, 25L), using six M8 Spring Washers (67) and six M8x16mm Bolts (78).
Place the
Safety Tether Key (42) onto the Computer (32).
NOTE:
PLEASE FULLY TIGHTEN ALL HARDWARE INSTALLED IN STEP 1 AND
STEP 2 WITH THE ALLEN WRENCH WITH PHILLIPS SCREWDRIVER PROVIDED.
Hardware:
6 Spring Washers (M8)
6 Bolts (M8x16mm)
Allen Wrench with Phillips Screwdriver
Tool:
23
24
78
67
78 7
42
25L
25R
26
6
32
