LifeGear 97017 Owner'S Manual Download

Page: 2 / 24

TABLE OF CONTENTS

WARRANTY

------------------------------------------------------------------------------ 2

IMPORTANT SAFETY INSTRUCTIONS ------------------------------------------- 3

PARTS LIST -------------------------------------------------------------------------------- 5

ASSEMBLY COMPONENTS ---------------------------------------------------------- 6

TOOL ---------------------------------------------------------------------------------------- 6

EXPLODED VIEW ------------------------------------------------------------------------ 7

ASSEMBLY INSTRUCTIONS --------------------------------------------------------- 8

LIFTING UP THE TREADMILL -------------------------------------------------------- 13

SETTING DOWN THE TREADMILL ------------------------------------------------- 14

MOVING THE TREADMILL ------------------------------------------------------------ 15

OPERATING THE COMPUTER ------------------------------------------------------ 16

CARE, MAINTENANCE & TROUBLESHOOTING GUIDE -------------------- 19

BELT ADJUSTMENT -------------------------------------------------------------------- 20

LUBRICATION ----------------------------------------------------------------------------- 21

EMERGENCY STOP -------------------------------------------------------------------- 21

WARM UP AND COOL DOWN ROUTINE ----------------------------------------- 22

Summary of Contents for 97017

























Search results

Summary of Contents for 97017

Reviews:

Related manuals for 97017

Brands by name

Popular brands

LifeGear 97017, Owner'S Manual

Search results

Summary of Contents for 97017

Reviews:

Related manuals for 97017

Brands by name

Popular brands