LifeGear 63145 Owner'S Manual Download Page 76 | Manualshive

Page: 76 / 82

background image

13

one Nylon Nut (31), and two Flat Washers (30). Tighten bolt and nylon nut with two
Double Open End Wrenches provided.

J. Pull the Leg Press Cable (A-37) forwards through the Base Tube (1). Slot the Pulley (12)

into the Base Tube (1) and pull the Leg Press Cable (A-37) through underneath the
Pulley (12).    Then secure the Pulley (12) into the Base Tube (1) with one Hexagon
Head Bolt (26), one Nylon Nut (31), and two Flat Washers (30).    Tighten bolt and nylon
nut with two Double Open End Wrenches provided.

K. Pull the Leg Press Cable (A-37) up through the Foot Extension Frame (8). Slot the

Pulley (12) into the Foot Extension Frame (8) and pull the Leg Press Cable (A-37)
through over the Pulley (12).    Then secure the Pulley (12) into the Foot Extension
Frame (8) with one Hexagon Head Bolt (25) and one Nylon Nut (31).    Tighten bolt and
nylon nut with two Double Open End Wrenches provided.

L. Pull the Leg Press Cable (A-37) downwards through the Base Tube (1). Slot the Pulley

(12) into the Base Tube (1) and pull the Leg Press Cable (A-37) through underneath the
Pulley (12).    Then secure the Pulley (12) into the Base Tube (1) with one Hexagon
Head Bolt (26), one Nylon Nut (31), and two Flat Washers (30).    Tighten bolt and nylon
nut with two Double Open End Wrenches provided.

M.

Pull the Leg Press Cable (A-37) upwards to fix the other end of the Leg Press Cable

(A-37) to the Foot Extension Frame (8) with one Hexagon Socket Pan Head Cap Bolt
(27), one Nylon Nut (31), and two Flat Washers (30). Tighten bolt and nylon nut with
one Allen Wrench and one Double Open End Wrench provided.

Hardware:

(25) Hexagon Head Bolt

1 PC

(26) Hexagon Head Bolt

4 PCS

(27) Hexagon Socket Pan

Head Cap Bolt

1 PC

(30) Flat Washer

6 PCS

(31) Nylon Nut

6 PCS

«
...
74
75
76
77
78
...
»

Summary of Contents for 63145



















































































Reviews:

No comments

Related manuals for 63145

Brand: Vectra Fitness Pages: 8

Brand: ParaBody Pages: 3

Brand: Life Fitness Pages: 11

Brand: Life Fitness Pages: 15

PULL-UP TRAINER

Brand: Total Gym Pages: 12

MG-GRANITE GRANITE6

Brand: NL Pages: 9

Brand: Weider Pages: 16

MOTIVE FITNESS R250

Brand: U.N.O Pages: 28

Brand: ICON Health & Fitness Pages: 20

Brand: impulce 2 Pages: 17

Brand: Hang ups Pages: 6

Brand: WeiderPro Pages: 32

Brand: ParaBody Pages: 14

Brand: Sunny Health & Fitness Pages: 9

Brand: Sunny Health & Fitness Pages: 17

Brand: Ironman Fitness Pages: 32

Brand: Vicore Fitness Pages: 8

NordicTrack RW700

Brand: ICON Health & Fitness Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands