33
(68) Nylon Lock Nut M10
4 PCS
(73) Flat Washer Ø10
8 PCS
(84) M10x45 Hex Bolt
2 PCS
(85) M10x65 Hex Bolt
1 PC
(83) M10x25 Hex Bolt
1 PC
Step 3
Pull the Butterfly Arm Cable (31) downwards to the Crossed Double Floating Pulley Bracket
(18). Draw the Butterfly Arm Cable (31) around the Pulley (60) on the Crossed Double
Floating Pulley Bracket (18). Then attach the Pulley (60) onto the Crossed Double Floating
Pulley Bracket (18) with one M10x45 Hex Bolt (84), one M10 Nylon Lock Nut (68), and two
Ø10 Flat Washers (73). Tighten bolt and nut with two Wrenches provided.
Pull the Butterfly Arm Cable (31) upwards, then use the same procedure as step 2 and step
1 to install the other end of the Butterfly Arm Cable (31).
PLEASE REFER TO THE “CABLE LOOP DIAGRAM” SECTION ON PAGE
25.
Pulley:
Hardware:
2 Wrenches (19-17)
Tool:
18
31
(60) Pulley
2 PCS
