27
(68) Nylon Lock Nut M10
2 PCS
(73) Flat Washer Ø10
4 PCS
(84) M10x45 Hex Bolt
2 PCS
Step 2
Pull the Lat Bar Cable (30) towards to the second Pulley (60) and draw it under the Pulley
(60). Then attach the Pulley (60) onto the Top Frame (3) with one M10x45 Hex Bolt (84),
one M10 Nylon Lock Nut (68), and two Ø10 Flat Washers (73). Tighten bolt and nut with
two Wrenches provided.
Pull the Lat Bar Cable (30) towards to the third Pulley (60) and draw it around the Pulley
(60). Then attach the Pulley (60) onto the Top Frame (3) with one M10x45 Hex Bolt (84),
one M10 Nylon Lock Nut (68), and two Ø10 Flat Washers (73). Tighten bolt and nut with
two Wrenches provided.
PLEASE REFER TO THE “CABLE LOOP DIAGRAM” SECTION ON PAGE
25.
Pulley:
Hardware:
2 Wrenches (19-17)
Tool:
30
(60) Pulley
2 PCS
