16
Step 5
Insert each Weight Stack Sliding Rod (6) into the corresponding hole in the Top Frame (3).
Secure Weight Stack Sliding Rods (6) in the Top Frame (3) using two M10x25 Hex Bolts (83)
and two Ø10 Curve Washers (77). Tighten bolts with the Wrench provided.
Attach the Top Frame (3) onto the Main Support Tube (2) with one Curve Plate I (25), two
M10x80 Hex Bolts (86), two M10 Nylon Lock Nuts (68), and four Ø10 Curve Washers (77).
Tighten bolts and nuts with two Wrenches provided.
Hardware:
2 Wrenches (19-17)
Tool:
6
77
86
83
77
3
25
77
68
2
(83) M10x25 Hex Bolt
2 PCS
(77) Ø10 Curve Washer
6 PCS
(86) M10x80 Hex Bolt
2 PCS
(68) Nylon Lock Nut M10
2 PCS
