10
Hardware:
․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․
3. Handlebar Post and Handlebar Post Cover Installation
Remove six M8x15 Bolts (19) and six Ø8xØ16x1.5 Curve Washers (20) from the Main
Frame (48). Remove bolts and curve washers with the S6 Allen Wrench provided.
Slide the Handlebar Post Cover (21) up to the Handlebar Post (14).
Put the cable end of resistance cable of Tension Control Knob (16) into the spring hook of
Tension Cable (35) as shown in drawing A of figure 3. Pull the resistance cable of Tension
Control Knob (16) up and force it into the gap of metal bracket of Tension Cable (35) as
shown in drawing B of figure 3.
Connect the Sensor Wire (64) from the Main Frame (48) to the Extension Sensor Wire (13)
from the Handlebar Post (14).
Insert the Handlebar Post (14) onto the tube of the Main Frame (48) and secure with six
M8x15 Bolts (19) and six Ø8xØ16x1.5 Curve Washers (20) that were removed. Tighten
bolts and curve washers with the S6 Allen Wrench provided.
Slide the Handlebar Post Cover (21) down to the Handlebar Post (14).
Allen Wrench S6
Tool:
16
21
19
20
19
20
35
64
48
14
13
13
16
16
16
35
35
A
B
(7) Screw ST4.2x20mm
2 PCS
(3) Screw ST2.9x16mm
5 PCS
