11
4
INTEGRATED CONSOLE DISPLAY & USER CONTROLS
The integrated display is located on the left hand side of the desktop ledge and shows the following session data:
A.
Time:
Current session duration
B.
Speed:
Current speed
C.
Distance:
Distance walked
D.
Steps:
Number of steps taken
Session results will be displayed for 2 minutes after the STOP button is pressed or after 10 minutes of being paused.
Emergency Stop Magnet (E-Stop)
The rectangular magnet connects to the E-Stop Lanyard, which must be clipped to the user’s clothing when the Tread-
mill Desk is in use. Pulling the lanyard so that it comes free of the magnet will stop the walking belt. This serves as a
safety feature, stopping the belt should the user stumble or fall.
Note:
The E-Stop Magnet must be attached before the walking belt and desktop height actuators are allowed to move.
Removing the E-Stop Magnet stops the walking belt and desktop height actuators. All the parts remain electrically ener-
gized. In case of electrically caused errors, remove the power cord from the electrical outlet.
A
MPH
MI
2:30:30
2.0
20.30
23000
B
C
D
