31
HOW TO SOLVE BASIC
OPERATING PROBLEMS
Symptom
Probable Cause
Corrective Action
No Power
9-volt battery voltage too low
Harness not connected
RPMs too low
Replace 9-volt alkaline battery
Disconnect and reconnect
harness
Maintain 40 RPMS or more
Difficult to pedal
10- to 15-hour break-in
period not complete
Selected level of difficulty
too high
Ride the bike for 10 to 15
hours
Lower the level of difficulty
Keys dont respond
(excluding the START key)
Not entering valid workout
values
Refer to the
Operating
Instructions and Program
Descriptions
Bike shuts off during ride
User stopped pedaling or
RPMs dropped too low
Not entering proper
desired workout duration
Maintain a speed of 40 RPM
Check that desired work-
out duration appears in
display window prior to
pressing ENTER
Display flickers or fades
in and out
Pedaling too slowly
Wire harness connector
loose
Maintain a speed of 40 RPM
Carefully remove console
and disconnect then re-
connect the 16-pin
connector
Lifepulse doesnt respond
Not making contact with
all four sensors
Sensors are dirty
Harness not connected to
console display
Make certain your hands
touch all four sensors
Clean with soft cloth and
mild liquid cleanser
Check harness connection
60 minutes is the factory setting for the Maximum Program Duration. To increase or decrease the Maximum Program
Duration see the
Optional Settings for the
Lifecycle 6500HR
Aerobic Trainer
section.
All manuals and user guides at all-guides.com
all-guides.com
Summary of Contents for Lifecycle 6500HR
Page 4: ...4 All manuals and user guides at all guides com...
Page 36: ...36 All manuals and user guides at all guides com a l l g u i d e s c o m...
Page 37: ...OPERATION MANUAL All manuals and user guides at all guides com...
Page 38: ...10601 West Belmont Avenue Franklin Park IL 60131 All manuals and user guides at all guides com...
