LifeFitness ACTIVATE OSX, Assembly Instructions Manual

Page: 7 / 106

2
S
ET
-U
P
Read the Activate Cardio Series Operation Manual before setting up the Life Fitness product. Contact Life Fitness Cus-
tomer Support Services to request a printed copy of the Activate Cardio Series Operation Manual.
Follow all safety instructions in Section 1. Place the product where it will be used before beginning the set-up procedure.
W
HERE TO
P
LACE THE
L
IFE
F
ITNESS
C
ROSS
-T
RAINER
Allow 1 ft. (0.3 m) of clearance in front of the Life Fitness Cross-Trainer to allow for movement of the pedal levers. It
should be easy to mount the Life Fitness Cross-Trainer from the side.
H
OW TO
S
TABILIZE THE
L
IFE
F
ITNESS
C
ROSS
-T
RAINER
After placing the Life Fitness Cross-Trainer in position, check the unit’s stability by attempting to rock it. Any slight rocking
indicates that the unit must be leveled. Check the stabilizing feet (B) to determine which foot does not rest fully on the
floor. Rotate the foot counter-clockwise to lower it. Recheck the stability and adjust again as needed until the Life Fitness
Cross-Trainer is stable and no longer rocks.
Lock the adjustment into position by tightening the jam nut (A) against
the stabilizer bar with an open end 17 mm wrench.
Note: Stabilize the cross-trainer each time the unit is relocated.
C
HECK FOR
P
OWER
The console is powered by a rechargeable 6-volt battery. Check the battery by pressing the POWER ON key. The console
should light up, and the MESSAGE CENTER should display a prompt to set up a workout. If this does not occur, mount
the Life Fitness Cross-Trainer and begin pedaling. The console should then light up, making it possible to program a work-
out. Pedal for 10 to 20 minutes at
1.5 mph (2.4 kph)
or faster during a workout to charge the battery. Afterwards, the pedal
action during workouts keeps the battery charged. If the console still does not light, contact Life Fitness Customer Support
Services.
U
SING THE
P
OWER
A
SSIST
O
PTION
The cross-trainer’s optional Power Assist feature makes it possible for the console to be powered by an external electrical
source, eliminating the need to pedal at a minimum speed to supply constant power to the console. With this option, users
who wish to use the cross-trainer for rehabilitative exercise may pedal at a rate below the minimum without losing console
power.
Enabling the Power Assist option requires an optional kit. Contact Life Fitness Customer Support Services to order the kit.
A
B
5