LifeFitness 9500HR, Service Manual

Page: 35 / 75

7
Lifecycle 9500HR Series Exercise Bikes
DIAGNOSTIC MODES (Continued)
DIAGNOSTICS STATE 9 - LC9500HR/LC9500R MODEL SELECTION
Within this state, configuration as an upright or a recumbent can be selected.
The ‘DOWN ARROW’ will configure as a Recumbent.
The ‘UP ARROW’ will configure as a Upright.
The ENTER key led will indicate when the value is the default. This value is stored in EEROM and is kept when the
unit is not in use.
Pressing the ‘CLEAR/PAUSE’ key will return to DIAGNOSTICS STATE 8.
Pressing the ‘START/ENTER’ key will advance to DIAGNOSTICS STATE 10.
DIAGNOSTICS STATE 10 - WATTS
Within this state, WATTS can be enabled or disabled
The ‘UP ARROW’ will turn ON the WATTS mode.
The ‘DOWN ARROW’ will turn OFF the WATTS mode.
Pressing the ‘CLEAR/PAUSE’ key will return to DIAGNOSTICS STATE 9.
Pressing the ‘START/ENTER’ key will advance to DIAGNOSTICS STATE 11.
DIAGNOSTICS STATE 11 - METS
Within this state, METS can be enabled or disabled
The ‘UP ARROW’ will turn ON the WATTS mode.
The ‘DOWN ARROW’ will turn OFF the WATTS mode.
Pressing the ‘CLEAR/PAUSE’ key will return to DIAGNOSTICS STATE 10.