LifeFitness 9500HR, Service Manual

Page: 34 / 75

6
Lifecycle 9500HR Sereis Exercise Bikes
DIAGNOSTIC MODES (Continued)
DIAGNOSTICS STATE 6 - MAXIMUM PROGRAM DURATION
Within this state, the MAXIMUM PROGRAM DURATION is displayed and can be adjusted. Valid range is from 10-
99 minutes.
The ‘DOWN ARROW’ will decrease the value by 1 minute. Key will Auto-Repeat if held.
The ‘UP ARROW’ will increase the value by 1 minute. Key will Auto-Repeat if held.
The ENTER key led will indicate when the value is the default of 60 minutes. This value is stored in EEROM and is
kept when the LC9500RHR is not in use.
Pressing the ‘CLEAR/PAUSE’ key will return to DIAGNOSTICS STATE 5.
Pressing the ‘START/ENTER’ key will advance to DIAGNOSTICS STATE 7.
DIAGNOSTICS STATE 7 - TELEMETRY ENABLE/DISABLE
Within this state, the TELEMETRY can be turned ON or OFF.
By default, the LC9500RHR will have TELEMETRY ON.
The ‘DOWN ARROW’ will turn off the telemetry.
The ‘UP ARROW’ will turn on the telemetry and display a heart shape in the program profile window.
The ENTER key led will indicate when the value is the default of TELEMETRY ON. This value is stored in EEROM
and is kept when the Lifecycle is not in use.
Pressing the ‘CLEAR/PAUSE’ key will return to DIAGNOSTICS STATE 6.
Pressing the ‘START/ENTER’ key will advance to DIAGNOSTICS STATE 8.
DIAGNOSTICS STATE 8 - ENGLISH/METRIC UNITS
Within this state, ENGLISH or METRIC units can be selected.
The ‘DOWN ARROW’ will select METRIC units. The ‘UP ARROW’ will select ENGLISH units.
The ENTER key led will indicate when the value is the default of ENGLISH UNITS. This value is stored in EEROM
and is kept when the unit is not in use.
Pressing the ‘CLEAR/PAUSE’ key will return to DIAGNOSTICS STATE 7.
Pressing the ‘START/ENTER’ key will advance to DIAGNOSTICS STATE 9.