4.
Installation and parts list
Carefully take out the treadmill from the shipping
carton. Ensure that none of the parts is not
missing (picture no. 1).
Take 2 short screws and washers and attach the
left and right vertical beams to the part of
treadmill. Do not tight the screws fully before
complete the installation.
There are two cable connections at the top
of the right vertical beam. Make sure they
are properly conect in. Using 2 long screws,
secure the frame to the vertical beams and
make sure cables are not pinched. Attach
the plastic covers to the joint.
Using a screw, secure the control panel at a suitable
angle to the frame so that the panel does not rotate,
causing damage to the cables. Place the red security
key with the magnetic side at the marked position on
the control panel.
Note: The machine can only be started with the
safety key located in the correct position. Keep the
safety key away from children.
Note: Ensure that all screws are firmly tightened and that you have no leftover parts.
Summary of Contents for 4891223123067
Page 47: ...P ednastaven programy...
