Life Span ZOOM, User Manual, Page: 8 / 33

LIFESPAN ZOOM Page 7
(6) “fast” key
When the machine is in operating condition, press “fast”, it speeds up.
(7) “slow” key
When the machine is in operating condition, press “slow”, it slows down.
(8) “incline” window
Press “up” or “down”, the selected incline will be shown in ”incline” window.
(9) “speed” window
Press “fast” or “slow”, the selected speed will be shown in ”speed” window
(10) “safety key” key
Under an emergent condition, pull “safety key”, the treadmill will stop working
automatically.
(11) “stop” key
Press “stop”, the treadmill stops working.
(12) “ down” key
Press “down” key, the incline decreases 1level per time.
(13) “speed shortcut key” key
Press “speed shortcut key”, the speed goes directly to the number you selected,
but this key only works after startup.
(14) “incline shortcut key” key
Press “incline shortcut key”, the incline goes directly to the number you select, but
this key only works after startup.
(15) “select” key
Press “select”, it shows time, distance and calorie in turns.
(16) “set” key
In the state of initialization, press ”set”. It can set backwards time, backwards
distance, backwards calorie.
Time will be increased or decreased by one minute once time.
Distance will be increased by 2km once time, while will be decreased by 1km once
time.
Calorie will be increased by 30 once time, while will be decreased by 10 once time.
4.2 Getting Started
Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the
power switch located at the front of the treadmill below the motor shield. Ensure that
the
safety key is installed, as the treadmill will not power on without it. When the
power is turned on, all the lights on the display will light for a short time.