18
Or
Or
Or
Adjust the desired temperature by pressing the Up/Down arrows
on the control panel or remote control.
Or
Desired temperature options vary from 59
℉
to 86
℉，
or from
15
℃
to 30
℃
. Once you have chosen the desired temperature, the
heater will remain on until the room temperature increases to the
temperature on the digital display. The heater will cycle on and
off to maintain the desired room temperature.
Or
Press
℃
/
℉
button to change the display temperature between
Fahrenheit and Celsius.
The Fahrenheit indicator LED will light when the temperature is
displayed in Fahrenheit.
The Celsius LED will light, when the temperature is displayed in
Celsius.
4. Setting the POWER OFF TIMER Function
Note: The Power-Off-Timer Function will allow for the heater to power OFF after a certain set
time, and can only be set while the heater’s display is in the “On” position.
Or
Turn the heater to the “On” position. Press the Timer button on
the heater’s control panel or the remote.
The digital display changes from the “temperature” to the
“hours” option for the timer. Continue to press the timer button
to change the number of hours you would like the heater to run
before powering itself off .The hour options for the timer are
from 0 to 12 hrs. (in 1 hr increments).
The selected hour increments will flash for a few seconds, then
revert back to the set desired temperature .The Timer indicator
light will remain lit as long as the Timer is set. The heater will
power OFF when the internal heater clock counts down the hour
increments you set.
5. Setting the POWER-ON-TIMER Function
Note: timer-power-on function can only be set while heater is in power-off mode.
