18
PREPARATION
Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet.
Heater to be
operated only in upright position with caster wheels attached.
Turn on the main power switch in the rear of the unit. Press the On/Off button on the display to power up
the heater’s display.
You may use the ON/OFF button on the remote as well, but you will need to insert 2 AAA batteries into the
remote control battery compartment before using (Batteries Sold Separately)
OPERATING INSTRUCTIONS
1.
Power the Display On/Off and Select Desired Mode
Or
Turn the heater on by pressing the ON/OFF button on the control
panel or by pressing the Power button on the supplied remote
control.
Note: Powering off the heater will stop the heating process only.
The fan will continue to blow for approximately 3 more minutes
to allow for the interior components to cool. The fan will then
turn off automatically.
2. Select a Heat Mode
Or
Press the MODE button to toggle between the three heat
modes.
High Mode uses 1500W; Low Mode uses 750W. ECO
mode is an Economic Energy Saving Function. When ECO
mode is chosen, the heater will manage itself from less to
more heating power (watts) in an attempt to maintain a
constant warm 68
℉
(20
℃
).
3. Setting Desired Temperature
