Life Ionizers Fuzion, User Manual

Page: 12 / 24

www.LifeIonizers.com
12
75
F U Z I O N
6. Locate a good place on your countertop for the filter box.
7. Run the 1/4” line to the filter box and then cut it.
8. Attach the cut end of the 1/4” line to the inlet of the filter box.
9. Now attach the remaining 1/4” line to the outlet of the filter box.
10. Run this 1/4” line up through the utility hole of your sink, or
through a drilled hole, to the LIFE Fuzion™ sitting on your
contertop.
11. Cut the line and insert the cut end into the inlet of the LIFE
Fuzion™.
12. Take the remaining length of the 1/4” line and attach it to the
outlet of the LIFE Fuzion™.
13. Run this line to your sink and let it rest there. This is to drain the
acid water.
There, all done! If you don’t have any access between under your
sink and your countertop and don’t want to drill any holes in the
countertop or wall, we do have faucet diverter valves available. Call
your dealer and they will be able to assist you. If you choose to use
a faucet diverter valve, the filter box will have to sit on your counter-
top next to the LIFE Fuzion™.
NOTE: If you’re not going to use the LIFE Fuzion™ for a
long period of time, please unplug it. If more than a week,
you should change the filter before you resume using the
LIFE Fuzion™.
Changing the Filter
When it’s time to change the LIFE Fuzion™ filter, the filter lamp
will blink blue.
Before inserting your new filter in the LIFE Fuzion™,
soak filter
upright in cold tap water for 15 minutes prior to use.
After inserting
the new filter, hold the Select button and Start button simultane-
ously for five seconds and this will reset your filter life.