www.LifeIonizers.com/Support
19
75
9000/9100/9200
LCD Functions
1. Alkaline water selection lamp:
The Alkali lamp is ON when
alkaline water is selected.
2. Acid water selection lamp:
The Acidic lamp is ON when acidic
water is selected.
Purify water selection lamp:
The Purify lamp is ON when purify
water is selected.
Outlet water pH/ORP value:
It shows the pH/ORP value of the
outlet water.
3. Amount of water & speed:
It shows the amount and speed of
inlet water.
4. Wash lamp indicator:
It will be used when compulsory washing
function is required. (If the unit works continuously up to 30
liters or a little over 30 quarts, even if it is in automatic operating
mode, there will be an activation of 20 sec. automatic washing
function.) * This washing time and period shall be decided upon
the capacity setting.
5. Mode display indicator:
Displays the MODE function.
6. 1st filter life indicator:
It shows the 1st filter’s remaining life.
7. 2nd filter life indicator:
It shows the 2nd filter’s remaining life.
8. Alkaline/Acid water level:
It marks the level of alkaline/acidic
water.
9. Error display lamp:
This is the function to use when the unit has
a malfunction or error.
10. Voice set display lamp:
It is to control the voice volume.
11. On electrolysis display lamp:
It shows the status of
electrolysis function.
