GPF2718J
Owner’s Manual
9
Step 6
Align the holes on the side insulation board (13)
with the holes on the right cart (the wheel side).
Screw a M4 bolt (F) into each pre-drilled hole with
M4 washer(E) and M4 nut(I ) .
Step5
Align the holes in the top front panel(6) with the holes
in one of the left side support(12), screwing a M6 bolt
（
A
）
into each pre-drilled holes.
Align the holes in the top front panel(6) with the holes
in one of the right side support (11), screwing by a M6
bolt into each pre-drilled holes.
Repeat the procedure for top back panel (7) with left
side support and right side report.
NOTE: left side support should be on the same side as
the left foot and the right side support should be on the
same side as the right foot (the wheel side).
