background image

2

SAFETY

INSTRUCTIONS

Basic precautions should always be followed, including the following safety instructions when using this treadmill: Read all 
instructions before using this treadmill.

DANGER:

To reduce the risk of electric shock, please read the following:

z

Always unplug the treadmill from the electrical outlet immediately after using and befor cleaning, assembling, or servicing.

NOTE: Failure to follow these instructions may lead to personal injury and cause damage to the treadmill.

WARNING:

To reduce the risk of burns, fire, electric shock or injury to any persons, please read the following:

z

Never leave the treadmill unattended when plugged in.  Disconnect by turning off the master power switch, and unplugging from

outlet when not in use and before putting on or taking off parts.

z

Use this appliance only for its intended use as described in this manual.  Do not use attachments not recommended by the 

manufacturer.

z

Never operate this treadmill if it has a damaged cord or plug, or if it is not working properly.  If it has been dropped or damaged, or

been exposed to water, return the appliance to a service center for examination and repair.

z

Do not attempt any maintenance or adjustments other than those described in this manual.  Should any problems arise, discontinue

use and consult an Authorized Service Representative.

z

Never operate the appliance with the air openings blocked.  Keep the air openings free of lint, hair, and the like.

z

Do not use the treadmill outdoors.

z

Do not pull the treadmill by its power cord or use the cord as a handle.

z

Keep children and pets away from the equipment while in use.  This machine is designed for adults only.

z

Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

z

Keep Dry - do not operate in a wet or moist condition.  Save these instructions.

z

Do not operate the treadmill near a blanket.  Excessive heating can occur and cause fire, electrical shock, or injury to user.

z

Keep electrical cord away from heated surfaces.

z

Never insert any object into any opening.

z

Keep the treadmill on a solid, level surface with the minimum safety area clearance of 2000mm x 1000mm of the treadmill.  Be sure

the area around the treadmill remains clear during use and has adequate clearance.

z

This treadmill is for household use only.

z

Wear comfortable and suitable clothing when using the treadmill.  Do not use the treadmill barefoot, in only socks or in sandals,

always wear athletic shoes.  Never wear loose clothing because it could run the risk of getting caught in the treadmill.

z

Only one person should be on the treadmill while in use.

z

Always hold on to the handrails while using the treadmill.

Summary of Contents for 97630





















Reviews: