8
2. Seat Cushion and Seat Post Installation
Remove three Ø16xØ8x1.5 Washers (38) and three M8 Locknuts (42) from underside of the
Seat Cushion (27). Remove locknuts with the Multi Hex Tool with Phillips Screwdriver
provided.
Guide bolts on underside of the Seat Cushion (27) through holes on top of the Seat Post (25),
attach with three removed Ø16xØ8x1.5 Washers (38) and M8 Locknuts (42). Tighten
locknuts with the Multi Hex Tool with Phillips Screwdriver provided.
Slide the Seat Post Cover (32) onto the tube of the Main Frame (1).
Insert the Seat Post (25) into the Seat Post Bushing (12) on the tube of the Main Frame (1).
Adjust the seat position and insert the M16x1.5 Seat Post Knob (8). Turn the M16x1.5 Seat
Post Knob (8) in the clockwise direction to tighten.
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
Tool:
27
38
42
25
8
32
12
1
