12
ADJUSTMENTS
Adjusting the Tension Control Knob
To increase the tension, turn the tension control knob in a
clockwise direction.
To decrease the tension, turn the tension control knob
in
a counterclockwise direction.
Adjusting the Rear Stabilizer End Cap
Turn the rear stabilizer end cap on the rear stabilizer as
needed to level the upright bike.
Adjusting the Seat Height
Turn the seat post knob in a counterclockwise direction
until it can be pulled out. Pull out the seat post knob and
then slide the seat post up or down direction to the
suitable position. Lock the seat post in place by
releasing the seat post knob and sliding the seat post up
or down slightly until the seat post knob "pops" down into
the locked position. For added safety, tighten the seat
post knob in a clockwise direction.
NOTE: When adjusting the height of seat post, make
sure the seat post bushing does not exceed the mark
line on the seat post.
Tension Control Knob
Rear Stabilizer End Cap
Seat Post Knob
