SM51 Unpacking & Assembly Instructions
7
4.
Mount the 56” lat top
(part T from
HARDWARE
section) to the 4-stack cell using a
5/8” socket and combination wrench. Insert two of the large 7/16” by 6” bolts using the
hardware configuration shown in Figure 7. Mount the 29” tricep top (part U in
HARDWARE
section) to the frame and connecting beam (See Figure 7).
Figure 7. Configuration for 6” bolts.
Figure 8. Mount the weight stacks.
5.
Mount the weight stacks to the 4-stack cell.
To do this:
A.
Remove the tricep back rest bolts
using a 9/16” socket and combination
wrench (see Figure 9).
B.
Unbolt the top plate and remove the guide rods
using a 9/16” socket and
combination wrench (see Figure 9).
