Life Fitness Signature FZLE, Owner'S Manual

Page: 9 / 39

2. Specifications LIFE FITNESS Signature Series Owner’s Manual
2-3
18. Integral Bearings
•
Bearings are sealed bearings with a basic radial load rating of over 2,000 pounds.
Bearings are mounted within precision-machined housings for optimal alignment,
which results in smooth and friction free movement.
19. Support Rails
•
SLP has wire brushed stainless steel rails.
20. Bolts
•
All hardware is stainless steel, zinc plated or nickel plated
21. Upholstery
•
Contoured pads on selective units
•
All edges are stitched to eliminate any folds in the material that would limit durability.
22. Foam
•
Three and Four pound EVA foam (deformation resistant) or equivalent is used on all
machines. The foam is injection molded directly to the multi-ply wood support board
with integral 10mm T-nuts.
23. Hand Grips
•
Handgrips are an extruded 60-durometer-thermorubber compound that is non-
absorbing, wear and tear resistant and exhibits good dry and wet frictional
characteristics.
•
The grips are retained with aluminum collars, which eliminates the tendency of the
grip to slide off the handle.
24. Seat Adjustments
•
Numeric seat and pad adjustments correctly align body to machine for proper
posture, muscle isolation and body stabilization.
•
Gas assisted springs (where applicable) to improve ease of use on adjustments
•
Internal seat carriage adjustment rollers are made of molded polymer mounted on
machined steel axles for smooth, durable operation.
25. Foot Platforms
•
All foot platforms are molded rubber with a slip resistant texture
26. Instructional Placard
•
Visual placards provide step by step instructions as well as pictures to illustrate
proper use and muscles trained.
27. Equipment Anchoring
•
All machines have holes in the feet, which allow for easy anchoring to the floor. Life
Fitness recommends that all machines be anchored to the floor to minimize the
possibility that they will be tipped.