Life Fitness Signature FZLE Page 8 Owner'S Manual Download

Page: 8 / 39

2. Specifications LIFE FITNESS Signature Series Owner’s Manual

2-2

7. Top Weight Bushings

•

The top weight is stabilized with an engineered composite structure with self-

lubricating bushings.

8. Weight Stack Guide Rods

•

Guide rods are ¾” cold drawn steel, turned ground and polished with hard chrome

finish

9. Weight Stack Suspension

•

Durable rubber bumpers are placed under each stack to reduce shock and vibration

stresses to the frame and facility floor.

10. Weight Selection Shaft

•

The shaft is constructed of zinc plated cold finished steel and precision drilled for

accurate pin selection

11.

Weight Transport

•

7x19 construction, 3/16” galvanized steel, internally lubricated, nylon-coated aircraft

cable with breaking strength rated at over 4,000 pounds.

12.

Cable Adjustment

•

All cables can be adjusted at the top weight utilizing a metric 24mm open-end

wrench.

13. Weight Stack Guards

•

All weight stacks are fully guarded on the front and backside to prevent bystanders

from inadvertent contact with the weight stack during use.

14. Pulleys

•

All pulleys are at least 4-1/4” working diameter using fiberglass-impregnated nylon

with precision fit cable groove and double sealed bearings.

15. Pulley Covers

•

As a safety precaution, all pulleys are covered to minimize the danger of a moving

pulley catching a person’s finger or clothes.

16. Cams

•

All cams are CNC machined from solid polymer and individually designed for each

unit to match the appropriate muscle strength capability curve

17.

Counter Balanced Input Arms

•

Input arms on equipment are counter balanced where appropriate to eliminate the

weight of the assembly from the weight selected by the user

Summary of Contents for Signature FZLE








































Search results

Summary of Contents for Signature FZLE

Reviews:

Related manuals for Signature FZLE

Brands by name

Popular brands

Life Fitness Signature FZLE, Owner'S Manual

Search results

Summary of Contents for Signature FZLE

Reviews:

Related manuals for Signature FZLE

Brands by name

Popular brands